Cast-iron whirlpool bath

When renovating a bathroom and installing plumbing fixtures, including a bathtub, you may be confused at first among the many types of bathtubs. Despite this, among all kinds of bathtubs, cast iron bathtubs still lead the way. The main advantage of such baths is still reliability, quality and durability. Besides, the abundance of forms and models of modern cast-iron bathtubs allows each customer to find the most suitable variant for his/her bathroom. One of the "peculiarities" of some modern cast-iron bathtubs is a hydro-massage function. In this article, we'll tell you about the advantages and parameters of the choice of such bathtubs.

1. Due to the fact that cast iron is a very strong material, cast iron baths are very reliable and last a long time. With proper use and care, the lifetime of cast iron bathtubs is up to fifty years. There is no way to find another material with such service life on the market.
2. Cast iron baths are not afraid of sharp temperature drops, which is typical for this subject and the room in which the bath is located. In addition, these baths can stay warm for a long time, and, consequently, the water in the tub will stay warm. A bathtub made of cast iron will never lose its shape, and the thickness of the walls will not allow it to sag when you enter it.
3. Due to the fact that cast iron baths have a heavy weight, the need to fix the tub will disappear.
4. Special anti-corrosion coating, which covers cast iron baths, will extend their life. Thanks to this coating, the bathtub will shine like new for a long time, will not be exposed to scratches and rust. A smooth and even layer of factory enamel will prevent dirt accumulation and spread of germs.
5. An important advantage of cast-iron baths is easy cleaning and the ability to use absolutely any detergents.
6. In addition, cast-iron baths are characterized by good sound insulation. You practically will not hear the flowing water.
7. And finally, an incomparable advantage of whirlpool cast iron baths is the massage function. The benefits of hydro- and aero-massage are undeniable.
8. Another pleasant surprise is the possibility to equip the tub with headrests, supports, handles and other necessary details.
9. A variety of shapes and models of modern cast iron bathtubs will fit any bathroom interior.

One of the few disadvantages of cast iron bathtubs, which is also their advantage, is the heavy weight of cast iron bathtubs. Because of the heavy weight, cast iron baths are hard to carry, transport and install. Another disadvantage is the high cost of the cast iron bath and its installation.

The hydromassage function, provided in cast iron bathtubs, is a very useful, convenient and rather uncomplicated system. If you want, you can install such a system in a regular bathtub yourself. However, this requires a lot of effort and expense. It is much easier and more convenient to buy a bathtub that is already equipped with such a system. An important feature of the whirlpool is that it stimulates blood circulation, relieves fatigue, relaxes and tones the body.

The whirlpool system consists of nozzles and jets mounted on the walls of the tub, pipes, air compressor and water pump. Nozzles and jets are designed to allow jets of water with air to flow out of them under high pressure. The direction of flow and water pressure can be adjusted through a special control panel. The pipes contain air, which determines the effectiveness of the jet. And a small pump, which is started by a special pneumatic button, will provide the pressure. At the same time the system is not loud, a little will be heard only the operation of the engine. So that even this soft noise does not interfere with your relaxation, you can play music or radio. And to enhance the benefits and effects of whirlpool admissible use of aromatic oils or sea salt.

• In order to avoid clogging of the whirlpool system pipes, you should try not to carry out hygienic water procedures in the whirlpool bathtub. For this purpose, it is better to install a shower cabin in the bathroom.
• After each whirlpool bath, be sure to rinse the tub with clean water, and preferably rinse with a liquid detergent and a soft sponge, and then wipe dry with a rag.
• For good cleaning of whirlpool equipment, it is necessary to use special liquids, which clean water and sewage pipes. Do not use scratch brushes when cleaning the bathtub.

As a rule, stores and manufacturers of cast iron bathtubs with whirlpool function give a warranty period of 3 to 25 years. But proper use and care of the tub will extend the service life much longer. It should be noted that today some cast iron whirlpool bathtubs have a self-cleaning function. Of course, such models cost an order of magnitude higher, but it will make it much easier to care for the bathroom.

If you decide to install a whirlpool cast iron bathtub in your bathroom, first decide on the size. To do this, take a measurement of the bathroom space where you want to install the tub. Today, the most popular sizes of cast iron bathtubs are bathtubs with the following parameters:

• 150x70 cm;
• 170x70 cm;
• 170x75 cm;
• 180x80 cm.

The depth of these baths ranges from 40 cm to 46 cm. As for the overall height of the bath, then the figure depends on the presence and height of the legs.

The most popular form of cast iron bathtub is a rectangular bath. In a standard-sized bathroom, a rectangular bath with a length of 150 cm will do well. Placing it along the wall, you will save a lot of space. Corner forms of whirlpool baths are also not a bad option. They can be placed in the corner of the bathroom. For large bathrooms, you can buy oval or round-shaped bathtubs. If you have an unlimited budget and large size of the bathroom, your imagination is not limited.

Below are described the names of the companies and brands that currently enjoy the reputation of the best manufacturers of cast iron bathtubs:

• Jacob Delafon of France currently holds the leading position in supplying very high quality cast iron bathtubs. In the manufacture of cast iron bathtubs of this manufacturer, mainly environmentally friendly materials are used. In addition, they are characterized by beautiful appearance and are very comfortable to use.
• The Spanish company ROCA manufactures absolutely all kinds of bathroom equipment. High quality and longevity of products, as well as the use of the latest technology in production have made the products of this company "favorites" of Russian buyers.
• It is impossible not to mention the leader in the production of whirlpool baths - Jacuzzi. The company provides the market with a huge selection of whirlpool baths of various designs and prices - from simple economy class to elite models at exorbitant prices.
• A fair third place goes to the Russian Kirov Plant and Novokuznetsk plant "Universal" for their reliable cast iron products, which are not inferior in quality to foreign manufacturers, and affordable prices for them.

Based on the above, you can make a small list of recommendations, following which you can easily buy and install a cast-iron bath with hydromassage:

1. After choosing the place where you will put the bathtub, determine the size of the bathtub.
2. Decide on the limit of the amount you are willing to spend on the purchase and installation of a whirlpool bath.
3. Make a list of stores where you will go to look at the tub. It is desirable that the store where you buy a bathtub, has a good reputation, has been on the market for more than a day, provided warranty service, so that in case of problems, you can apply to him for repair.
4. Choose a model of bath for your taste and the interior of your bathroom.
5. Find out about the manufacturer and brand, the cost of the overall design and the terms of delivery and installation, what materials are used for the accompanying elements. It is worth reading reviews of previous buyers of bathtubs of this brand, which you can do on the Internet.
6. Pay attention to the appearance, the capacity of the compressor and pump, the number and location of nozzles.
7. Carefully read the warranty information on the bath. As a rule, it should be at least 3 and no more than 25 years.