What to do if the washing machine does not turn on?

Problems in the operation of washing machines are divided into two main groups: the machine does not react to turn on and the machine turns on, but the washing program does not start.

First of all, clarify whether there is electricity in the apartment. It is possible that the electricity in the house has been cut off or a short circuit has occurred, which knocked out the safety plugs. Check the circuit breaker and, if it is off, weigh the lever. Did the failure happen again? Then look for the cause of the short circuit.

The circuit breaker (RCD) is also the cause of the power failure. This happens if the washing machine's housing is energized and you get an electric shock when you touch it.

Carefully inspect the power cord - the cord coming from the washer-dryer. There is a high chance that it will break or be damaged by frequent kinks or other mechanical stress. Use a special electrical measuring device, a multimeter (or a tester), to check the condition of the cord. Replace the damaged cord. If this is not possible, find the break, connect the cord fragments by twisting and fix them with tape or solder. Note that this method is a last resort.

Pay attention to the serviceability of the extension cord, through which the washing machine is connected. To do this, plug the machine directly into the socket.

Sometimes the problem lies in the malfunction of the electrical outlet itself. Its suitability is easy to check by turning on another appliance through it. If it works - the socket is working.

In a number of washing machines, power is derived on the power button. Its condition is checked with a multimeter, working in a buzzer (sound emitter) mode. After disconnecting the machine from the power supply, sound the button in the "on" position. If the device makes a sound - the current flows properly. In the off mode the tester will remain silent. If a malfunction is detected, the power button must be replaced.

LG, Indesit, Samsung, Hotpoint Ariston, Bosch, Ardo, Electrolux have an FPS or noise filter. Its purpose is to neutralize the electromagnetic radiation emitted by the washing machine, which can affect the operation of other household appliances. The FPS usually fails when it has been in use for a long time or due to a short circuit. When it breaks, the electrical circuit is interrupted, the current supply is disrupted, and the machine shows no signs of life. To check the condition of the filter, use a tester. Test first the input (there are three wires leading to it) and then the output (there are two wires). The FPS is faulty and needs to be replaced if voltage is noted on the input, but not on the output.

Examine the control module. It is a printed circuit board that regulates the control of the parts and units of the entire unit. The microprocessor, which ensures the smooth operation of the machine elements, is also located here.

To determine the cause of the malfunction, examine the electronic module parts. A damaged element or a punctured track is detected by means of a multimeter, and then replaced or soldered. Before repairing, estimate your own strength.

A person with sufficient skills and qualifications can repair a damaged circuit board. Buying a new module is expensive, so, in order not to risk it, contact professionals.

Make sure that after loading the laundry the hatch is tightly closed. Otherwise the special safety mechanism will not allow the drum to be filled with water. Then make sure that the door locks after the program starts. If the door just snaps shut, check to see if it is energized. Is it energized, but the hatch is not locked? Then the locking device will have to be replaced.

Watch how the drum fills with water. The presence of unusual noises or complete silence signal that the water ingress is hampered and the machine simply has nothing to wash.

Didn't help? Make sure that you selected the right washing program (you did not press several buttons at the same time or accidentally poke past). If in doubt, turn off the machine for 30-40 seconds, then turn it back on. The malfunction that occurred will be corrected.

In this case, look for the cause of the malfunction in the faulty wiring. In most LG, Indesit, Samsung, Hotpoint Ariston, Bosch. Ardo, Electrolux, wires are often in contact with the internal parts, due to which, over time, damage occurs. Check the condition of the cables with a tester and replace the problem area.

The problem may also lie in burnt-out capacitors, which should be replaced.

These simple tips will allow you to quickly and competently fix common problems occurring in the operation of your washing machine.