Washing machines with front loading

The range of washing machines these days is impressive in variety. Among dozens of different models with different modes and functions it is possible to get lost. Most of the machines are front-loading machines. This is the most popular now washing machines, presented in different sizes and designs. But before buying such equipment, it is necessary to understand what nuances of choice are most important.

• Devices with front-loading are presented in a much larger range, so the consumer can easily select the best option for themselves.
• Repair models, which have a front-loading, is easier.
• On top of such a machine you can put laundry, detergent and other items.
• Thanks to the small height of the machine with front-fill, you can install it under the sink or countertop.
• Such machines are easy to integrate into the furniture.
• The dispenser in such models is easy to pull out and clean.
• Buyers like the attractive design of front-loading machines, as well as the ability to observe the washing process through the hatch.
• Front-loading models are cheaper than machines with vertical loads.

• In front of the machine, which is loaded from the side, there must be enough space to open the hatch.
• There is a risk of depressurization of the hatch, which will cause water from the machine to flood the floor of the room.

Dimensions of most models with front-loading are similar - most of the machines have a width of about 60 centimeters, and the height of the products on average is 85-90 centimeters.

On sale are also compact models with a smaller width (47-50 cm) and a smaller height (68-70 cm).

• Full-size machines have a depth of 60 centimeters.
• Narrow machines have a depth of 35-40 centimeters.
• In ultra narrow machines, the depth is 32-35 centimeters.

Such parameters of narrow machines as width and height do not differ from the dimensions of standard devices, but the depth in such models is from 35 to 40 centimeters. The capacity of narrow machines is from 3.5 to 5 kg of dry laundry.

In addition to stand-alone machines, you can buy a machine with the possibility of built-in. Such a machine can be both fully built-in, and the model under the countertop. In the first case, the machine can be built into the furniture, hinging the front, which will make the machine inconspicuous among other cabinets. The second option is represented by machines that differ from machines with separate installation only by the presence of the top removable panel.

The spin in front-loading machines can be represented by the following classes:

• C - the spin speed is 600-800 revolutions, and 60% of the moisture remains in the laundry
• B - spin speed is 800-1200 rpm and clothes remain 50% moist.
• A - the spin speed is greater than 1400 rpm, and only 40% of the moisture is retained in the laundry

Washing in models with frontal filling also has several classes. However, in most of the machines that you will meet in technology stores, you will see class A. It corresponds to high quality washing.

And another parameter that is classified in washing machines is the power consumption. It determines the amount of electricity consumed by the machine per wash. Energy consumption classes are marked with the letter A and the pluses - the more pluses around the letter A, the less energy the machine requires. Although it is not recommended to take this into account when buying, because the statement about lower kW consumption refers only to the most economical washing programs.

Most housewives do not see the need for a machine with a drying option, because the washed laundry is well wrung out and dries quite quickly after removal. However, buying a machine with a dryer allows you to take out of the machine completely dry clothes, which can be immediately put in the closet.

The disadvantage of machines with drying function is the increased consumption of electricity, which must be taken into account when purchasing them. But if a hostess has to choose between saving space, time and energy waste, then buying a unit with a dryer that allows you not to install a dryer in the room would be a good choice.

Most of the front washing machines on sale in our country are made in Europe. Among European brands, German machines from Bosh, Kaiser, Siemens and Hansa, and Italian machines from Indesit, Ardo, Candy and Hotpoint-Ariston are especially in demand. Appliances from the Swedish manufacturer Electrolux are also very popular. Techniques of Korean manufacturers LG and Samsung are also in great demand.

Before you buy a new machine, determine the place where it will stand. So you can find out whether you need a built-in model, as well as what dimensions of the machine will be the most optimal. Also, consider whether you will need to stack anything on top of the machine.

Next, determine the capacity you need for the machine, taking into account the number of occupants. If you have 3-4 people in your family, the best choice is a machine that holds 4-6 kg of laundry. People who live alone buy machines with a smaller capacity, and families with more people living together need a larger machine.

Be sure to ask about the list of available programs in the selected machine, as well as additional functions. Among them Pay attention to the options that ensure safe use of the machine, such as leakage protection or childproofing. And finally, evaluate the design of the machine and its cost, choosing the model that is most attractive to you.

To find out what you should consider when choosing a washing machine, check out the E96ru channel video.