Mold in the bathroom - let's solve the problem cardinally

Everyone has at least once encountered mold, so he can immediately detect it. Mildew often appears in the bathroom, because the conditions in this room are most favorable for its emergence and development.

Carriers of mold are microspores that move in the air. When conditions are favorable for them, they settle on the walls and begin to multiply actively. As a result, black spots soon begin to appear.

Conditions that promote the reproduction of microspores:

• A high level of humidity - A high humidity level of around 90-95%, as a large amount of water evaporates;
• Insufficient sunlight.They are an excellent way to stop the fungus from spreading;
• poor ventilationthe supply of fresh air is insufficient;
• During the repair works the walls were not additionally treated the walls were not treated during the repair work, or the treatment was poorly executed.

The above conditions often occur in the bathroom, so the appearance of mold in the bathroom room is quite common.

When mold first begins to appear on the ceiling or walls, you will see black dots that will later become stains if no action is taken to combat it. The presence of mold spoils the appearance of the bathroom. Over time, the cladding and plaster will begin to peel off. But this is not all the harm of mold.

To prevent mold from ever appearing in your home, you must follow some rules to prevent mold from ever appearing in your home. Namely:

• You must have a towel rail in your bathroom. Towel railIt warms the air perfectly, and as a result the moisture is lost.
• Try to open the bathroom door often to improve air circulation. You can also use extractor bathroom fan..
• After bathing, you should use a dry cloth to wipe down wet surfaces, paying particular attention to tiles and flooring.
• Wipe dry the surfaces in the bathroom more often so that condensation does not collect. Pay special attention to seams between ceramic tiles, gaps behind sinks, tubs, and showers. To prevent mold from forming, it is necessary to carry out Treatment with special antiseptics. You can use different grout or mastic for joints between tiles and on the surface of the tiles, so that less moisture is absorbed.
• It is not recommended to dry wet things in the bathroom, so as not to increase the level of humidity.
• It is necessary to monitor the condition of the plumbing, so as not to miss a small leak.

Often mold forms in the bathroom, so you should regularly inspect the walls and ceiling, as well as not to forget about preventive work. If you only notice the first manifestations of mold, then immediately begin to fight it. If the measures taken are not effective, then you should use strong-acting chemicals or act cardinally - carry out major repairs.

The main rule is that you should clean the bathroom regularly, even if visually everything seems to be clean. It is necessary to wipe down the ceramic tiles, thoroughly wash the floor using special detergents.

Cleaning will help prevent the first manifestations of mold or get rid of the active reproduction of spores.

If you start breeding mold, then it is very difficult to get rid of it later. It can even take several years. Therefore, at an early stage of its manifestation it is necessary to start an immediate fight.

A sign of mold is the formation of plaque, and it does not consist of dirt, but has a peculiar color - black, gray or swamp. You can touch it and you can tell at once if it is mold, because mold is soft and porous.

If you still have trouble identifying or if the resulting buildup is mold, then you should smell it. The smell of stale and damp air cannot be confused. You feel as if you are in an old, damp cellar or basement.

Many people use folk methods to combat mold, because they have been used by more than one generation of people. To start an active war with mold spores, you should first inspect how badly the walls and ceiling are affected. Using special preparations to destroy fungi according to the instructions is as follows: the tool is diluted in 10 liters of water, then apply to the walls and after a few hours wipe dry.

Even grandmothers used bleach and vinegar to rid their house of mold. Today, in any household chemicals store you can buy a remedy that has chlorine in its composition. First, the affected walls are smeared with a special chlorine-containing solution, and the procedure is repeated several times.

Then, after two or three hours, proceed to clean the wall of spores, using a stiff brush.

Also very popular in the fight against the enemy is industrial alcohol. First it is applied to the walls and after three or four hours it should be removed from the surface.

Many generations use copper sulfate. It is applied with a special brush, and after a few hours, just as in the previous options, the solution is washed off the walls and they are dried. When using it, you need to be very careful, acting according to safety rules.

Recipes for making a solution to remove mold per ten liters of water.

You can prepare one of the suggested options:

• 1 kg of copper sulfate;
• 100 grams of copper sulfate and bleach containing chlorine;
• 500 grams of copper sulfate and 2 liters of table vinegar;
• 1 liter of bleach, which includes chlorine.

Another good way to eliminate mold is a special solution with boric acid, hydrogen peroxide, vinegar and water. Their quantity should be performed according to the ratio of 1:2:2:4. To strengthen the effect of the solution, it should be heated to 50-70 degrees.

If mold has already affected huge areas of the bathroom room, then the above remedies will not help. There is only one option left - to knock down the walls to the brick to remove all the affected material and make cleaning.

Modern remedies to combat mold are more effective, and the expected result is not long in coming.

• The use of chemical cleaners of a special composition allow you to get rid of mold at the first signs of it. First use a sponge to remove the black spots and then apply the substance to the affected areas. This procedure should be repeated several times to prevent reinfection.
• Powerful antiseptics are used in the last stage of microspore growth. They can be of different types: water-soluble, oil-based or white spirit-based. When choosing an antiseptic, you should be guided by the material on which mold is developing. But, major repairs should not be postponed. It is better to use antiseptics on bare walls, after removing tiles, plaster or other cladding.
• An air ionization and sanitation treatment can help you forget about mold once and for all. A professional is called in to do it, and they follow all the safety rules. This procedure will also help get rid of rodents and insects. But its cost is large enough, so the services of specialists are resorted to in extremely neglected cases.

Usually the appearance of mold in the bathroom is characterized by the presence of an unpleasant smell of damp. To get rid of the smell, it is necessary to eliminate the source of infection, namely all the materials on which there are fungal spores.

If mold has appeared on ceramic tiles, you can try to wash it and clean off the fungus with special solutions. If under the influence of mold fell flooring, plaster or drywall, nothing will help to eliminate the unpleasant smell. The only way will be to carry out major repairs.

To get rid of the smell of mold at least for a while, you need to air the bathroom more often, use air fresheners.

A very good remedy is baking soda, thanks to its excellent absorption of odors. It is recommended to sprinkle it on all pre-treated areas and clean after a few hours. You should also remember that baking soda also absorbs moisture, so it will be a good prevention of fungus.

Remember that it is better to follow the rules of mold prevention than to fight it for a long time. But, if mold has appeared in your bathroom, it can be easily defeated using folk or modern methods.