Towel with Bathroom Sink - Practical and Stylish Solution

Undoubtedly, it is impossible to imagine any bathroom without a sink. Coziness and comfort in this room can add only properly selected furniture. Due to the fact that this room is usually very limited space, the ideal furniture option for it is a cabinet with a sink built into it.

A cabinet with a washbasin is a design consisting of a small cabinet with a sink and faucet built on top. Drain and water pipes are carried out inside the cabinet. And the hole for the faucet is made on the sink or on the surface of the countertop.

The cabinet can include several shelves with doors, sliding drawers and drawers, departments with baskets for dirty laundry or towels. Of course, the more drawers, the higher the capacity and functionality of the construction. And if the size of the room allows, then the furniture is built in two sinks, which is very convenient for a large family.

1. It is a rational solution from the position of space saving, as the cabinet usually takes unused space under the sink.
2. It hides the drain and water pipes.
3. Inside the nightstand you can place numerous bathroom accessories: cosmetics, household chemicals, towels, sponges, dirty laundry, etc.
4. They look stylish. A wide range of shapes and designs allows you to match any bathroom interior design.
5. A sink countertop provides additional comfort during hygienic procedures.
6. In the large cabinet you can install baskets for dirty laundry and even a washing machine.

Disadvantages of a nightstand with a built-in washbasin, in general, there are no disadvantages. But they can be found when you choose the wrong model for your bathroom. For example, if in a small bathroom to put a large cabinet with a countertop. Some people absolutely do not like floor vanity units with solid legs. In their opinion, the sink of such a nightstand is uncomfortable to use, because the legs can not move freely. In addition, sometimes fixing faulty plumbing installed inside furniture is not always feasible or convenient.

Now you can find many types of furniture with a washbasin. They have different shapes, sizes and installation methods, and are made of different materials and parts.

Depending on the method of attachment, there are two types of nightstands with a washbasin bowl:

• floor;
• suspended.

The advantage of the first group of bollards is that:

1. they are easy and simple to install;
2. You can move to different parts of the room as much as you want;
3. there is a huge number of floor models of bollards, decorated in different ways;
4. They can withstand a huge weight, so it is on the floor bollards you can see wash bowls made of marble.

Floor vanity units can have different bases, such as models on legs or with a plinth. The second subspecies is also referred to as pedestals on a monolithic frame.

The installation process of such models is not complicated. If the design does not need to be attached to the wall, then it is enough to assemble it and simply place it in the right place. Such models can be put in rooms with underfloor heating system. They do not prevent feet from moving freely, it is easy and unhindered to clean the room. The most reliable cabinets are considered those samples on legs, the material for which is chrome metal.

They are very convenient to use, and they can be simply placed in the right place. Such nightstands are reliable if the plinth is made of reliable moisture-proof materials. Otherwise, the entire structure can lose its integrity after some time.

Ideal for small rooms. They take minimum space and at the same time perfectly fulfill their tasks. They look quite stylish and very neat. Despite the fact that they look compact, they can accommodate many items. Corner furniture models with a washbasin also come in floor and wall models. It is these cabinets are in increasing demand today, as they are installed on the most often unused place - the corners of the premises.

This is a washbasin with a large mirror, with a built-in washbasin bowl and storage cabinets on the legs underneath it.

Like the corner models, hanging pedestals are becoming increasingly popular with buyers.

Their advantages are obvious:

1. They can be installed in small bathrooms. At the same time, they are able to visually increase the space.
2. They are easy to use.
3. Absolutely do not interfere with the cleaning of the room.
4. If flooding occurs, they, including the items stored inside them, will not suffer in any way.
5. They look very fashionable and stylish.

The only disadvantage is the need to mount on a very strong wall. Such bollards must necessarily be mounted with wall plugs or anchors. At the same time, the surface must be either a solid panel or a brick partition.

The most compact cabinet with a washbasin is a corner model, which has the following parameters: width 34cm* depth 29cm* height 79cm.

The simplest and smallest option among the conventional nightstands is a cabinet with a width of 40 cm, a depth of 32.5 cm and a height of 80 cm. Such a variant is suitable for small rooms. However, the most popular size among the compact options are nightstands 50*44.8*80 cm. For more spacious bathrooms, you can choose cabinets with larger dimensions: 90*46*84 cm, 120*45*82 cm, etc. The size of the sink can also be different.

The most common option is a bowl of sizes from 50 to 80 centimeters.

When choosing furniture for any room, you need to pay attention to the appearance of the furniture. It must match the design of the room. To do this is not difficult, it is enough to know some features of different styles in the interior. For example, for a room that is made in the classical style, the following will suit perfectly: a marble countertop, a sink made of porcelain, a cabinet made of natural wood with elegant legs. A gilded faucet will complement this luxurious interior.

For those who want to create a more modern, airy style, we advise to pay attention to the glass models of the cabinets. Fittings for furniture with a sink are better to choose a different color, not matching, but harmonizing with the color of the furniture. For example, if the cabinet is light, then the handles to it are better to pick up dark shades, but if the cabinet is dark, then pick up the elements of light shades. Thus, if you decided to buy a cabinet with a sink, you need to do it carefully and with love, so that it would be not only comfortable, but also cozy to be in the bathroom. Allow yourself the courage to experiment with different styles, having previously familiarized yourself with their features.

Furniture with a washbasin must be functional and beautiful, but if it is made of low-quality materials, all its usefulness is reduced to zero. Since it is the materials that determine the quality and durability of the entire structure. The main requirements for cabinet materials are their ability to survive sharp drops in temperature and moisture resistance. Materials that have these qualities are MDF panels, chipboard, artificial stone and wood. The surface of furniture made of MDF is usually treated in two ways:

1. Painting. First, a primer is applied to the surface of the material, and then it is painted with paint in several layers. This makes the furniture highly protected.
2. Treatment with a special composition. The material, both outside and inside, is treated with a special moisture-resistant liquid, which prevents the process of reproduction and spread of fungi, mold, etc.

A cabinet made of particleboard is cheaper, and various mechanical damages are not a problem. The surface of this material is covered with plastic sheet, which prevents the material from splitting and swelling. There is no doubt in the reliability of furniture and sinks made of artificial stone. The only thing that is very important is that the surface of the furniture is free of any damage, including scratches, which can destroy the integrity of the material. If the furniture is made of wood, it must necessarily be covered with a special moisture-resistant agent. In terms of cost, furniture made of natural wood is a bit more expensive than those made of MDF or particle board.

Equally important is the quality of fittings. Over time, the doors can start creaking and loosening. So the sturdier they are, the longer they will serve you.

As for the sink itself, it can be: ceramic, porcelain, faience, cast iron, steel, stone and glass. In this case, the materials of the cabinet and sink must be combined.

Depending on what materials the entire structure is made of, its cost varies. At the moment it ranges from 1050 to 325600 rubles.

To the purchase of furniture and sanitary ware for the bathroom should be taken seriously. After all, you buy it not for one year, but much more.

In order not to be disappointed in your purchase, consider the following recommendations:

1. Carefully consider the location of furniture and plumbing in the bathroom. Perform an accurate measurement of the place where you are going to install the cabinet.
2. After studying the types, shapes, and sizes of sinks and vanity units on the market, make your choice.
3. A cabinet without solid walls on the back side is convenient in terms of water and sewage system.
4. Choose materials that are resistant to temperature extremes and high levels of humidity. Any cracks, scratches or other damage, as well as stains or unpainted areas are unacceptable.
5. Give preference to fittings made of nickel-plated metal or aluminum. Such fittings will last longer than those made of chrome-plated plastic.
6. The presence of door and drawer closers closers will prevent the occurrence of loud banging during closing.
7. The more shelves, cabinets and compartments in the cabinet, the higher the functionality of the furniture. Having mirrors and a basket for dirty laundry also increases the utility of the nightstand.
8. Make sure that the chosen furniture matches the chosen interior design.
9. It should be painted with high quality and evenly.
10. If you are going to buy a corner cabinet model with a sink, make sure that the angle of the intended location of the cabinet is 90 degrees, otherwise the corner cabinet can not be installed until you adjust the angle of the room.

Installation of the cabinet with a built-in sink consists of several steps. To successfully go through all these stages, you need to follow some rules.

Usually, the new sink is installed in place of the old one. In this case, you do not need to puzzle over how to conduct the water supply and sewage. If, however, you wanted to install the cabinet in the new place, you will have to solve this problem. In addition, the furniture itself should easily fit there, and its cabinets freely open and close. If you are going to buy a wall cabinet model with a sink, make sure the wall is strong.

Making calculations and markings makes it possible to conduct the pipes accurately, without damaging the bollard itself. The fittings, that is, the connecting parts of the pipes, should be above the middle shelf. Incorrect measurement can lead to the fact that they will rest against the walls and furniture shelves. This also applies to the drainage system. For the drain pipe that comes out of the floor, you will have to drill a hole in the bottom and shelves of the cabinet. Then the corrugated hose will extend from the bottom to the top. Therefore, it is better to accurately measure everything beforehand and run all the pipes through the wall.

During the installation process, you will definitely need:

• adjustable wrench;
• FUM tape;
• screwdrivers of different sizes;
• screwdriver;
• faucet;
• siphon;
• plastic corrugated hoses.

If you purchased the furniture in a disassembled form, you will first have to assemble it with a screwdriver. The included instructions for assembling the furniture will help you with this. During this procedure, make sure that each piece is firmly connected to the other. Because once you put the sink on it, it will not be possible to tighten the screws any more.

After going through the previous steps, and having successfully prepared all the necessary items and tools, you can begin the process of installing the furniture with a sink:

• Turn off the water supply. Connect the faucet with hoses and secure the faucet to the sink. The best option for a cabinet faucet is a modern single-lever model.
• Use FUM tape (fluoroplastic sealing material) to seal the connecting parts.
• Install the siphon on the drain hole.
• Attach the sink to the surface of the cabinet.
• Move the assembled furniture to the installation location. Do not install the cabinet with the sink against the wall, as lack of ventilation may cause mold growth. If you need to attach it to the wall, do it using special bolts. But before you do that, make the calculations and make the marks.
• Move the cabinet away from the mounting location and drill at the marked points on the wall. Insert the wall plugs, put the cabinet back in and secure it with bolts.
• Connect the sewer pipe and the water system. This completes the installation process.

In the process of installing furniture with a washbasin, sometimes difficulties arise. For example, if the sewer hose prevents a tight fit of the furniture to the wall, it will be necessary to saw off part of the shelf, the bottom or the wall of the cabinet. To do this, use a hacksaw or jigsaw. Or, for example, the sink does not have bolt holes to mount it on the wall. In this case, you can glue it with silicone glue.

Once you have finished assembling and installing the cabinet with a washbasin, test the performance of the entire structure. First check that the cabinet is secure and stable, then turn on the water and check that there are no leaks anywhere. If everything works properly, you can safely turn in your work or enjoy your new furniture.

Making countertops with a sink built into them is not difficult. The advantage of making your own furniture is that it will be one-of-a-kind, will probably cost less, and will be made to the dimensions of your bathroom. However, in any case, first you need to make an estimate and calculate the cost of buying materials and missing tools. If it turns out that the purchase will cost you less, then what is the point of spending the extra money, effort, and most importantly time. If you still decided to make a cabinet with your own hands, then first measure the intended location and in accordance with this proceed to buy the following materials, parts and tools:

1. Moisture-resistant material for the cabinet.
2. A sturdy and waterproof countertop.
3. Washbasin in the right size.
4. Faucet.
5. Legs and handles for the furniture.
6. Fixing parts and fittings.

To make a cabinet under the sink, you need to go through the following steps:

1. Buying the material for the furniture, it can be sawed on the spot. The main thing is to specify the correct and exact dimensions of the future cabinet.
2. When you get home, you only have to assemble the sawn boards.
3. Install the legs and handles.
4. The next step in making a cabinet with a washbasin is to mount the washbasin in the countertop. To do this, you need to cut a hole for the selected washbasin: first take paper, make a pattern on it, cut the bottom of the sink, put it on the countertop and trace the inner line of the hole in the paper with a pencil. Drill a hole about 8mm in size with a drill. Then follow the path of the pencil with an electric jigsaw and cut out the hole for the sink.
5. Then apply silicone adhesive to the edges of the basin and insert it into the countertop.
6. Install the faucet in the hole for the faucet. Connect the water supply. If the sink does not have such a hole, using a drill, make such a hole in the countertop with a diameter of about 32 millimeters.
7. Next, you need to attach a siphon to the hole for the drain at the bottom of the sink, connect a plastic corrugated hose to the sewage system and ensure the tightness of the connection with putty or sealant. Otherwise, an unpleasant sewer odor will penetrate into the room.

To install a suspended cabinet and sink in it, you need to attach several metal corners to the wall. It is on them later will be held by the sink, countertop and cabinet.