Shower-toptyun for home and cottage - compactness and convenience

It's very common at the cottage or when camping to take a daily shower becomes a very urgent issue. To take water procedures, it is necessary to take a basin and heat water, and then manually drain the water on itself. This option is uncomfortable and problematic. A great solution for taking a shower in nature is to use a shower stompbox.

Its main features are mobility and regulation of water supply by means of legs. The reliability of the system is evidenced by the fact that there are no mechanical parts in the shower. Even children without the supervision of their elders can use this device, because it is completely safe.

The footfall shower can be used anywhere, because it is easy to carry. It fits compactly into a small bag, and the corrugated hoses are twisted without losing their original shape or kinking. When camping, in the country or outdoors, this shower will be a convenient means of taking water procedures.

The shower-toptun can be placed on a usual country shower, in a shower-tent, in a stationary cabin or simply in the open area. The sphere of application of shower-toptun is extensive enough, after all it allows to accept not only water procedures, but also gives an opportunity to water beds on a country site. The feature is that the length of the hose allows you to take water directly from the well, if it is available in the dacha.

Also shower-toptun is perfectly suitable for washing a car, windows of a country house, paths and sidewalks of a country site, after all the process occurs quickly and conveniently. It can be used even in the apartment, when the hot water is turned off.This sanitary product will never lie idle, because it can be useful in many situations.

To understand the principle of operation of the shower-toptun, you should first understand the structure of the device. The mechanism of this product consists of the following parts:

• rubber mat or rubber pedals;
• valves;
• water intake corrugated hose;
• water-receiving corrugated hose;
• The shower head.

In the following video you will see the process of assembling a purchased stomp shower (foot shower).

Preparing to take a water treatment with a stomp shower:

• First, you need to hang the hose with the nozzle at a suitable height so that the nozzle is above you.
• Place a rubber mat under your feet.
• One end of the hose should be immersed in a container of warm water, which should be heated beforehand. For a container, you can use a flask, tank, canister, inflatable pool or bucket, so that a large volume of water can fit.

Now you can stand on the mat and stomp your feet to run the mechanism of water from the tank through a hose with a nozzle. The stomp shower works on the same principle as a foot pump, which is why it is also called a pneumatic pump.

• Simple use of the shower mechanism. You only need to dip the hose into a container with water and with a few steps on a rubber mat the shower system will start - the water will pour from the watering can.
• Saving money. The cost of the shower-toptun on the market of sanitary equipment is on average 1500 rubles, but the construction of a stationary shower in the countryside requires much more cost and time.
• The versatility of the deviceIn fact, in addition to the direct purpose of the shower, you can perform watering of beds, wash the car or in the period of disconnection of the hot water supply will replace a full-fledged shower.
• Compact sizes Shower-toptoons consist of its design, which consists of two hoses and a rubber mat.
• Mobility. The shower is easy to assemble and disassemble, allowing it to be transported hassle-free to any location.

The water pressure in a stomping shower is completely dependent on human factors. The rhythm of the steps affects the creation of an even water pressure. If a person stops, then the water supply will stop completely.

At first glance, this is not very convenient, but it helps to save water consumption. With such a device, only 10 liters of water will be enough to thoroughly wash the entire body. Women especially like this mechanism, because simple aerobics while taking a shower helps to keep themselves in good physical shape, and also lifts their spirits.

The mechanism of operation of the shower-toptun is so simple that it can be made with your own hands.

To do this, you need to purchase several items:

• a foot pump for cars;
• rubber hose;
• cork made of rubber or wood;
• A plastic container with a lid;
• shower head;
• tube made of plastic or metal.

The process of making a homemade stomping pump:

• Fill the container with water and put it in the sun to heat.
• It is necessary to make two holes in the plug with different sizes (the diameter of one hole - 1 cm, the second - 2 cm).
• Insert the tubes into the holes. Through the hole of a larger diameter, the tube should reach the bottom of the container.
• Put rubber hoses on the tubes.
• Attach the foot pump to a tube of a smaller diameter, which will supply air into the container.
• The shower head is attached to the larger diameter hose.
• Additionally, you can make a holder for the shower head or use improvised objects: a fence, a wall or wood.

The design of the shower-toptoon is ready for use. But you can try to improve it, because human imagination has no limits. For example, a faucet with a watering can create so much pressure in the tank that even without running the pump, for some time the water will pour in a strong jet from the shower head.

To make showering more comfortable, you can attract another person who will pump air into the system with a car pump, and then swap places.

Also read our article about Heated shower for the cottage.